http://www.tracopower.com page 1 of 4 dc/dc converters tes 2h series, 2 watt ordercode input voltage output voltage output current max. effciency typ. tes 2-0510h 3.3 vdc 500 ma 70 % tes 2-0511h 5 vdc 400 ma 73 % tes 2-0512h 5 vdc 10% 12 vdc 165 ma 77 % tes 2-0521h (5 vdc nominal) 5 vdc 200 ma 74 % tes 2-0522h 12 vdc 83 ma 76 % tes 2-0523h 15 vdc 66 ma 76 % tes 2-1210h 3.3 vdc 500 ma 72 % tes 2-1211h 5 vdc 400 ma 75 % tes 2-1212h 12 vdc 10% 12 vdc 165 ma 79 % tes 2-1222h (12 vdc nominal) 12 vdc 83 ma 80 % tes 2-1223h 15 vdc 66 ma 80 % tes 2-2410h 3.3 vdc 500 ma 72 % tes 2-2411h 5 vdc 400 ma 75 % tes 2-2412h 24 vdc 10% 12 vdc 165 ma 79 % tes 2-2422h (24 vdc nominal) 12 vdc 83 ma 79 % tes 2-2423h 15 vdc 66 ma 79 % models features small smd package with standard footprint i/o isolation voltage 1500 vdc single and dual output models input voltage 5, 12 and 24 vdc high effciency up to 80 % operating temperature range C40 to +85c high accuracy of pin co-planarity qualifed for leadfree refow solder process according ipc/jedec j-std-020d available in tape and reel package 3-year product warranty with their small footprint these 2 watt dc/dc converters are an ideal and eco - nomical solution for many applications where an isolated voltage is required. typi - cal applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. with a new package design these converters are qualifed for the higher temperatures request - ed by lead-free refow solder processes. for automated smd production lines the devices can be supplied in standard tape and reel package.
http://www.tracopower.com page 2 of 4 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. dc/dc converters tes 2h series 2 watt input specifications input current no load / full load 5 vin; 3.3 vdc model: 60 ma / 470 ma typ. 5 vin; other models: 60 ma / 540 ma typ. 12 vin; 3.3 vdc model: 30 ma / 190 ma typ. 12 vin; other models: 30 ma / 210 ma typ. 24 vin; 3.3 vdc model: 15 ma / 95 ma typ. 24 vin; other models: 15 ma / 110 ma typ. surge voltage (1 sec. max.) 5 vin models: 9 v max. 12 vin models: 18 v max. 24 vin models: 30 v max. reverse voltage protection 0.3 a max. input filter internal capacitor output specifications voltage set accuracy see graphs below voltage balance (dual output models, balanced load) 1 % max. regulation C input variation 1.2 % / 1 % change vin C load variation see graphs below ripple and noise (20 mhz bandwidth) 120 mvpp max. temperature coefficient 0.02 %/k max. short circuit protection limited 0.5 sec. max. capacitive load 3.3 & 5.0 vdc models: 47 f max. 12 & 5 vdc models: 10 f max. (each output) 12 & 15 vdc models: 4.7 f max. (each output) general specifications temperature ranges C operating C40c to +85c C storage C40c to +125c C case 95c max. derating (convection cooling) 4 %/k above 75c humidity (non condensing) 95 % rel. h max. reliability, calculated mttf (mil-hdbk-217f, @ +25c, ground benign) >2000000 h i/o-isolation voltage (60 sec) 1500 vdc i/o-isolation capacity (100 khz, 1 v) 60 pf typ. i/o-isolation resistance (500 vdc) >10 gohm switching frequency 50 to 120 khz (depending on load) output voltage variation dependent on load (at nominal input voltage) 100% 20% 0 0% -10% +10% deviation of v out nom. output l oad max. min. ty p. +20% +5% -5% +15% 40% 60% 80% 3.3 & 5.0 vdc models: 100% 20% 0 0% -10% +10% deviation of v out nom. output l oad max. min. ty p. +20% +5% -5% +15% 40% 60% 80% other models:
http://www.tracopower.com page 3 of 4 dc/dc converters tes 2h series 2 watt outline dimensions physical specifications casing material plastic (ul94v-0 rated) weight single output models: 1.5 g (0.05 oz) dual output models: 2.2 g (0.08 oz) lead-free reflow solder process as per j-std-020d.01 (to find at: www.jedec.org - free registration required) moisture sensivity level (msl) level 2 as per j-std-033b.01 (to find at: www.jedec.org - free registration required) washing process www.tracopower.com/products/smd- wash.pdf packaging www.tracopower.com / products / tes2h -pack.pdf 3.04 2.54 5.08 (0.12) (0.10) (0.20) 0.30 (0.01) 8.9 (0.35) 9.3 (0.37) 13.7 (0.54) 12 4 85 0.25 0-4 s 1.5 (0.06) 6.15 (0.24) 12.3 (0.48) 6.15 (0.24) 0.6 (0.02) 1.8 (0.06) 2.54 (0.64) 13.1 (0.52) 1.3 (0.04) solder pa d 5.08 (0.20) pin single 1 Cvin (gnd) 2 +vin (vcc) 4 Cvout 5 +vout 8 no con. pin-out no con. = pin to be isolated from circuitry single output models dimensions in [mm], () = inch pin pitch tolerances: 0.13 (0.005) other tolerances: 0.25 (0.01) specifcations can be changed any time without notice. application note: www.tracopower.com/products/tes2h-application.pdf
page 4 of 4 rev. 07/12 dc/dc converters tes 2h series 2 watt specifcations can be changed any time without notice. pin dual 1 Cvin (gnd) 2 +vin (vcc) 4 common 5 Cvout 7 +vout 10 no con. pin-out no con. = pin to be isolated from circuitry dimensions in [mm], () = inch pin pitch tolerances: 0.13 (0.005) other tolerances: 0.25 (0.01) dual output models 3.04 2.54 5.08 (0.12) (0.10) (0.20) 0.30 (0.01) 8.9 (0.35) 9.3 (0.37) 16.3 (0.64) 12 4 10 7 0.25 0-4 s 1.5 (0.06) 6.15 (0.24) 12.3 (0.48) 6.15 (0.24) 0.6 (0.02) 2.54 (0.10) 5 1.8 (0.06) 2.54 (0.64) 13.1 (0.52) 1.3 (0.04) solder pa d 2.54 (0.64) 5.08 (0.20) outline dimensions jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|
